ELP Scientific offers a fast and complete package for chlorination/disinfection/sterilisation services at very competitive rates. Work can often be undertaken at very short notice if necessary, covering North England, Scotland and Wales.

The chlorination/disinfection process involves the pre flushing/swabbing of the pipe, introduction of a high strength chlorine solution, a period of standing, further flushing and another period of sitting before collection of final onsite parameters & water sample.  The waste water is dechlorinated.

Water sterilisation, Disinfection and Chlorination Certificates

ELP Scientific uses proportional chlorine dosing equipment to ensure an accurate and even chlorine  residual throughout the length of the pipe.  Onsite chlorine residuals are electronically measured and microbiological samples are analysed in A UKAS laboratory.

UK water companies require new ‘oversize’ service pipes (the pipe that joins the property to stopcock or meter) to be chlorinated and microbiologically tested prior to connection to their infrastructure.  ‘Oversized’ pipes are either those above a certain diameter or over a certain length – different water companies have different definitions of what is oversize in their area.  Before connecting to the mains to make it live they’ll need to see a chlorination certificate and the sample results of the microbiology test.  This is to demonstrate that the new pipe work is free from bacteria that could cause illness to those served by it.

Water chlorination, disinfection and sterilisation services can also be provided for many water assets such as internal plumbing, storage tanks and private distribution systems.  This includes marine fresh water tanks as used on private and commercial yachts, boats and ships.

Water Disinfection, Water sterilisation and Chlorination Certificates

Note to installers – it is very important that all pipes are installed following strict hygienic practices and ideally undertaken by an appropriately qualified contractor.  This should include dedicated clean-water-only tools & clothing for the job, sterile fittings and an extremely high level of workmanship.  Pipes should be securely capped (not taped/kinked over) during storage and installation.  Once installed the tails should be left fitted with cap-ends to prevent vermin/detritus ingress.  Any contamination, no matter how slight , may cause the microbiological sample taken after the chlorination process to fail.  This can cause delays and additional expense in repeating the process.

Please contact us below for further information and costs.

Contact us now for a Chlorination Quote

Complete the form below or call 07881 884000

Your Name (required)

Site Address & Postcode (required)

Telephone Number(required)

Email Address(required)

Job description (e.g. number of pipes, pipe material, pipe size, pipe length)

Mains water available on site?

Date needed

Locations covered by ELP Scientific include (but are not limited to);
England

Cheshire, Chester, Crewe, Nantwich, Warrington, Cumbria, Carlisle, Barrow-in-Furness, County Durham, Darlington, East Riding of Yorkshire, Kingston upon Hull, Greater Manchester, Lancashire,Blackpool, Blackburn, Burnley, Preston, Merseyside, Liverpool, Northumberland, North Yorkshire,York, Harrogate, Middlesbrough, South Yorkshire, Barnsley, Doncaster, Rotherham, Sheffield, Tyne and Wear, Newcastle, Gateshead, Sunderland, West Yorkshire, Bradford, Leeds, Wakefield, plus the unitary authority areas of North Lincolnshire and North East Lincolnshire.

Wales

Clwyd , Conwy, Denbighshire, Flintshire, Wrexham, Gwynedd, Isle of Anglesey.

Scotland

Ayrshire, Dumfries and Galloway, Edinburgh and The Lothians, Glasgow and Clyde Valley and The Borders.